Advertisement

Hypertufa Q & A

Let’s hear it for hypertufa!

You can make these lightweight concrete containers and these answers will help first timers. Hypertufa is a strong, but lightweight concrete that’s easily shaped with molds into containers, troughs and or by hand into figures, even leaves. See if any of your questions are answered then give it a try!

The Berry Botanic Garden, Marv Bondarowicz photo

Emma writes:

“Hi Sue, I love your wonderful website with so many fabulous tutorials! I have been dying to get my hands into some hypertufa projects, but have lots of questions! I am unsure of which recipe to use?  What is the extended curing process?  Is the mixture thick enough to be sculpted by hand without a mold or base structure?  I’ve also been wanting to make some step stones, should I use use Quik-crete instead of the hypertufa mix?  Why use hypertufa rather than just concrete or cement?
Thanks so much for any help you can offer!

Cheers, Emma

Hi Emma,

Oh, you’ll love doing either a concrete or hypertufa project.  I found the hardest part was getting the materials home due to the weight and then actually diving in.  That’s why I called a friend to give me a push.  I don’t know why I waited so long! ~~  Sue

I am unsure of which recipe to use?

The proportions we used were simple, one third each, Portland cement, peat moss and perlite.

Perlite, Peat moss and Portland cement

What is the extended curing process?

We unmolded our troughs the next day and kept them wrapped in the plastic for a day or two so they would dry slowly.   At this point they are the most fragile but can also be scratched or textured, with say, a fork or stick.

Do the troughs need to be sprayed with water during this time?

No. You don’t have to spray them. After unmolding, wrap or cover them with the same plastic and let dry slowly for one or two more days.

Hypertufa molds dry for 24 hours

How do you know when the finished project is ready to be used?

A couple days after umolding, we just planted them up,…simple!  They do get lighter in the next few weeks and months.

How how water do you use?

We mixed it to the consistency of thick brownie batter…like mud pies! Remember?  Whatever your container, you try to make all sides 1 1/2 inches thick.  It’s challenging to gauge it, but it gets easier each time.  My friend and I did all right even the first time at this, but I have to say, I was better at it than my friend! Shhh…  After a while she scooped the mix in and I molded the sides.  Teamwork!

Is the mixture thick enough to be sculpted by hand without a mold or base structure?

You can pat it into a shape by hand….we make small mushrooms with the extra we’re left with.

 

Blue Fox Farm’s hypertufa ‘hand’ pots

I want to make a hypertufa ‘hand’ container, using old gloves. How?

Fill an old glove with hypertufa mix and arrange the ‘fingers’ by placing the glove in a shallow bowl. Reader, Joey Arrowood, says “When doing the hands, I found that placing a small piece of cardboard between the fingers makes it easier to peel away the latex glove. I have broken several fingers and learned my lesson.”

Advertisement

If I wanted to add bits of glass or gems to the sides of planters or top of mushrooms, when would that be done?

We added those flat gems to the top rims and to the mushrooms right after molding them in the containers and before the drying process.  Some popped out and I glued them in with GEII Silicone in clear.

I’ve also been wanting to make some step stones, should I use use Quik-crete instead of the hypertufa mix?

For stepping stones, I’d use Quik-crete, just for the sturdiness.  . For stepping stones you need the strength rather than the lightweight, though I did use hypertufa for my stepping stone and it’s lasted three years wonderfully.

Hypertufa Mushrooms

If I use a Styrofoam cooler as the interior of a container, how do you go about packing the mix onto the cooler?

You can upturn a cooler, or anything, onto a table and pack the mix on all sides,…make the rims, now at the bottom thick enough to grab when lifting off the cooler mold. You could do the whole thing at once. Try a small cooler first, I’d think.

Troughs, stepping stones, mushrooms and freeform bowls

Why use hypertufa rather than just concrete or cement?

Hypertufa’s main advantage is it’s lightweight when dry. And it’s easy to do!  You can easily carry the planted hypertufa containers from spot to spot.  Troughs and hypertufa figures continue drying and curing for another few days to weeks, becoming lighter and stronger

You may have already seen these posts, Emma, but more details are included in them.

Make your own concrete planters

12 Unique hypertufa projects for the garden

How to make an easy stepping stone

Leafcasting

Thanks again for all your help! Now I just need to find a place to get a giant bag of perlite!  Cheers, Emma

Answering your questions will help improve the instructional posts we have so far,…and hopefully help others do this project.  Good luck and let me know how you do.  By the way, we found a big bag of perlite at Home Depot, a big hardware store…  ~~Sue

Unmold and dry

 

Finished and planted

Sandra Miles’s colorful leaf castings

 

Diana Daily’s freeform water bowls

 

Cheryl and I pack the extra hypertufa mix into Zip-locs to make freeform bowls

 

Do you have a question about hypertufa?  Ask in the comments!

 

Sue Langley

Sue Langley, a passionate gardener and photographer lives and gardens with her husband and Corgi, Maggie on 7 acres just south of Yosemite, Zone 7 at 3000 feet. She manages the Flea Market Gardening Facebook page and website.

View Comments

  • Laura A. Mathy says:

    How big can you make a trough? Can you use an actual horse-trough as a base instead of a box or a bowl? Or can you use this to coat the outside of a plastic or metal horse trough (roughly 2'x2'x4') to change its appearance? I can envision a raised-bed garden based on a horse-trough: textured with leaves, grass, stick, or bark imprints; colored to blend into the yard or painted with moss. One advantage of this decorative hypertufa shell would be its insulating qualities. Summers here can get very hot.

Recent Posts

Boat gardens sail away…with our hearts

Grow, Grow, Grow, Your Boat... These boat gardens are beautiful, colorful, and well grown.  It looks like a lot of… Read More

4 years ago

Decorate your garden with blue!

'Paint' Your Garden with Blue... Is your garden is singing the blues? Mix recycled containers and crafts with blue flowers… Read More

4 years ago

Lost and Found in the Garden

See this hilarious and sometimes poignant list of lost items in the garden Question.......what was the last thing you lost… Read More

4 years ago

Jeanne’s garden Baker’s rack

Designing a charming garden baker's rack When I first saw Jeanne’s well-arranged and simply delightful Baker’s rack, I thought, ‘Somebody… Read More

4 years ago

Billie’s Yellows in the garden

Choosing a color from 'Over the Rainbow Garden' Billie Hayman's garden is full of color and she shows how one… Read More

4 years ago

Alliums in the garden, real & crafty!

Alliums are drama queens in the garden! Whether real flowers, grown from bulbs or the crafted faux flowers modeled after… Read More

4 years ago
Advertisement